How to maintain and repair a Robocar

The Robocar is a powerful electric tractor and needs no daily maintenance as a result. We do recommend, however, that you follow the maintenance plan below to prevent issues. It also assures that workers can operate with the Robocar safely. Our specialist lists the points for consideration in this article for the maintenance and repair of the Robocar.

Plan of inspection

It is important to regularly inspect different sections of the Robocar. From one part to another, the number of times this should be performed varies. The control chart below shows the controls needed and how much you need these controls to be carried out.

Note: Before beginning the scan, always turn off the Robocar with the main switch.

Maintenance/check		Daily	Weekly	Monthly	Yearly
Battery charged sufficiently	Gauge of Battery Condition	✔
Damage to components of control		✔
Damage/visibility of stickers and pictograms		✔
Control of beeper and flesh operation		✔
Control operation obstacle detection bumper and sensor		✔
Cleaning the control panel	Moisture cloth		✔
Check for cable damage			✔
Control bolted dirt or rope on wheels			✔
General mechanical damage			✔
Battery charging (minimum)	Battery charger		✔
Battery fluid level monitoring (plates 1 cm below liquid level)	Distilled water			✔
Monitoring of wheel wear				6 months
Update rust	Varnish			6 months
Blow the clean motor carbon brushes and shorten them by more than 1 cm	Visual				✔
Swivel castors check and lubricate	Visual and spray grease				✔
Welding of construction control on (hair) cracks					✔

If it turns out that during one of the above tests, there is a fault in the Robocar, contact a mechanic immediately. Despite the defects, bringing the Robocar into service can be very hazardous and is therefore forbidden!

Maintenance issues and repair of the Robocar

Do you have any questions or would you like to get advice about the maintenance and repair of the Robocar? Then contact us or use the form below to ask your question.