Empas Atlanta Spraying Trolley 400L
Find the right part(s)
On working days your request will be handled within 24 hours by our team of specialists.
✔ Worldwide delivery
✔ Regular maintenance of horticultural machinery
✔ Hortispares is powered by Royal Brinkman
- Technical specifications
- Request information
The Empas Atlanta spraying trolley is developed to spray pesticides in indoor and outdoor horticulture. The spray cart is used in vegetable as well as floriculture crops. Empas spraying equipment is well-known for its high quality and simplicity. This sprayer has a tank capacity of 200 or 400 litres. On top of that, the sprayer […]
The Empas Atlanta spraying trolley is developed to spray pesticides in indoor and outdoor horticulture. The spray cart is used in vegetable as well as floriculture crops. Empas spraying equipment is well-known for its high quality and simplicity. This sprayer has a tank capacity of 200 or 400 litres. On top of that, the sprayer is equipped with a diaphragm or plunger pump. When you want to choose between these pumps, take the following into account. A diaphragm pump is used in situaties with viscous liquids such as lime sulphur. A plunger pump is extremely suitable for higher pressure to apply for example crop protection agents. Because of the countersunk wheelbases in the tank, the machine is constructed low and one can easily reach the filling opening of the tank.
The Empas Atlanta spraying trolleys are available with an electric or petrol motor, depending on your needs.
The trolley is equipped with motor, pump, tank, 3 wheels and a frame. Would you like to have a hose reel, high pressure hose or a spay gun? Or do you have specific desires? Please let us know in the comments of your request.
Not sure how to work with the low flow or high flow controller? Read our article about it for some tips and tricks on how to get started.
Maintenance is important for any machine. Check our articles on how to replace the gaskets or how to overhaul a pressure regulator for your Empas spraying trolley.
Make sure you clean the spraying trolley after using the trolley, since it could cause harm to the plants the next time you use it if you haven’t cleaned the it well.
- Socket and plug or 10-metre lead with plug.
- Hydraulic agitator in the tank (up to 60 bar)
- Sight glass with 50-litre scale divisions
- Clean water tank (16-litre)
- Filler pipe with Geka connection and check valve
- Brake on front wheel
- IE3 motors (400V)
- Plunger or diaphragm pump with electric motor or Honda petrol engine.
Parts from this machine
Hose HDR1 3/8″ L- 70cm + head R-R 1/2″ HW€ 16.43 excl. VAT
Pressure regulator 40LTR-50bar€ 209.00 excl. VAT
Ball valve 1/2″ F-M€ 8.97 excl. VAT
Hose clamp 13-20 mm SS€ 2.37 excl. VAT
Valve cover for 200 – 300 Ltr Forklifts€ 24.60 excl. VAT
Orange Ball Atlanta€ 0.64 excl. VAT
Press. regulator to 40 ltr.-40 Bar VITON€ 209.00 excl. VAT
Bushing Grommet 1 1/4″X3/4″ Synthetic€ 4.30 excl. VAT
Gasket 45X33X3€ 0.51 excl. VAT
Cristal 15X19€ 1.93 excl. VAT
Ball valve 1″ Synthetic€ 14.40 excl. VAT
O-Ring Atlanta€ 0.40 excl. VAT