Dorot Valve 75ST “1 1/2” – 3 Way 24VAC

Description

The 3-way version of the Dorot series 75 is available in 1 1/2”-3” version with a maximum capacity of 45 m3/hour. As with the 2-way version, a flow restrictor is optional. It can be controlled by water or air pressure. The design of the valve prevents water hammering, even with quick shut-off. The tap is […]

The 3-way version of the Dorot series 75 is available in 1 1/2”-3” version with a maximum capacity of 45 m3/hour. As with the 2-way version, a flow restrictor is optional. It can be controlled by water or air pressure. The design of the valve prevents water hammering, even with quick shut-off. The tap is suitable for use in dirty water. The 3-way taps can also be used as automatic pressure reducing valves and as float valves.

Benefits Dorot-75 valve:

• Larger capacity and less pressure loss
• A fully supported membrame in open and dense position
• Insensitive to soil, due to large inlet filter
• Large passages for control pressure, through application labyrinth (2-way)
• Adjusting screw (Throttle) for controlling capacity
• Improved control characteristic curve
• Non-return valve prevents opening after pressure drop (2-way)
• Large, easy-to-use manual control, 3 positions: open-density automatic. The shut-off valve can also be closed manually by means of a powerful coil.
• Pressure reducing pilot can be built in
• Nuts are stuck in the housing, so they won’t get lost
• Available in 2-way and 3-way version
• Simple conversion to 2 or 3 way

Additional information