Robocar 1600/1601 Electric tractor
- Description
- Technical Specifications
- Request information
Description
Robocar 1600/1601 This heavier model has the pulling power of two people (up to about 2000kg rolling weight on a flat floor). In addition, the ground clearance is greater so that this Robocar is suitable for use as a pulling unit in the sorting machine. If equipped with the optional positioning device, it is even […]
Robocar 1600/1601
This heavier model has the pulling power of two people (up to about 2000kg rolling weight on a flat floor). In addition, the ground clearance is greater so that this Robocar is suitable for use as a pulling unit in the sorting machine. If equipped with the optional positioning device, it is even possible to unload automatically. This Robocar is intended for harvest carts up to 700 mm wide. Only then both the ultrasonic impact sensor and the bumper hose are effective.
Developed peripherals:
- Priority rule intersections
- Positioning system, for automatic loading/unloading
- Two-way passages, to be able to use narrow passages
- Destination coding, to send the Robocar to the right location…
Maintenance
Maintenance is important for any kind of machine and the Robocar is no exception. Check our article on maintenance of a Robocar.
- The own weight is 285 kg.
- The load capacity is 150 kg (1 person).
- The pulling force is 1000N (= the pulling force of 2 persons).
- Maximum manually operated speed: ±5.5 km/h (walking speed).
- Maximum automatic speed: 3 km/h.
- Dimensions: 1450 x 690 x 1400 mm
- Power supply: built-in low-maintenance 24-volt lead-acid battery 225 Ah.
- Range with this battery set approximately 15 km (with average use this is sufficient for 1 full working day).