Dropper Cobra-mini 2,6ltr-black
€ 0.15 excl. VAT
Order Unit: piece(s)The online spare parts store for horticulture
✔ Worldwide delivery with FedEx
✔ You can place your order without an account
✔ Receive a tracking code when your order is shipped
.
- Description
- Additional information
Description
The Cobra dripper is a labyrinth dripper, with filter and plug in one and is therefore a very economical solution and alternative to capillaries. The Cobra is standard delivered as a hooked dropper, namely the Cobra-S, Cobra-mini and the Cobra-LF (Low Flow). There is also a straight Cobra, intended for multi-outlet systems. The difference compared to the Capinet dripper is that the Cobra has a built-in filter and is less susceptible to clogging, even in the long term or with dirty water.
Characteristics
- Accurate watering with constant pressure.
- By varying the pressure on the Cobra (from 0.5 – 1.2 bar), the watering can be adjusted to the water requirements.
- Application as a separate drip point or to be mounted in multi-outlet (water spider).
- Equipped with large inlet filter and labyrinth, which together provide excellent protection against clogging.
Application
- The application of the Cobra is mainly known in flower cultivation, where due to a high plant density, many tricklers per surface are needed.
- The Cobra-S, The Cobra-mini and the Cobra-LF can be used both as an individual drip point or in a multi-outlet (water spider). The straight Cobra is intended for multi-outlet systems only.
Technical data
Flow rate (at 1 bar) | 2,6 liter/hour (Cobra; Cobra-S; Cobra-mini; black) |
1,8 liter/hour (Cobra-LF; grey) | |
Operating pressure | 0,5 – 1,2 bar (with increasing flow) |
Recommended pressure | 1,0 bar |
Filtration | 130 micron (tap set) |
80 – 100 micron (main filtration) | |
Length/color | 15 cm (Cobra-S; Black) |
15 cm (Cobra-LF; grey) | |
11 cm (Cobra-straight; black) | |
8 cm (Cobra-mini; black) |
Installation & Maintenance
- Read ‘General use advice for drip irrigation’ for tips on storage, installation and use.
- Cobra drip irrigation systems can be cleaned with acid, peroxide, chlorine and/or suction (see ‘Cleaning and attention points for drip irrigation systems’).