Kentie Diaphragm Valve 1″
- Description
- Request information
Description
The Kentie diaphragm valve consists of a brass housing and cover, diaphragm and solenoid. The outlet side of the valve is on the side of the housing and has a female screw thread. The delivery opening is located in the middle on the underside of the housing and has the same female screw thread. The maximum working pressure […]
The Kentie diaphragm valve consists of a brass housing and cover, diaphragm and solenoid.
The outlet side of the valve is on the side of the housing and has a female screw thread. The delivery opening is located in the middle on the underside of the housing and has the same female screw thread. The maximum working pressure is 10 bar.
The diaphragm of synthetic rubber is clamped between the housing and the cover by means of 5 stainless steel bolts. A stainless steel spring is located above the diaphragm. The 8 watt AC coil requires 24 VA for opening and 16 VA to remain open. The DC coil is a 9 watt solenoid. The diaphragm valve can also be opened and closed by hand.
This valve is a normally closed valve (NC)