- Description
- Technical Specifications
- Downloads/Videos
- Request information
Description
Dosatron D3RE5 Dosatron is a water powered dosing pump The Dosatron, connected to the water network, uses the water pressure as its only driving force for the engine piston. This drives a piston, that sucks up the concentrate in the set percentages where after, it is mixed with the driving water. The thus formed solution […]
Dosatron D3RE5
Dosatron is a water powered dosing pump
The Dosatron, connected to the water network, uses the water pressure as its only driving force for the engine piston. This drives a piston, that sucks up the concentrate in the set percentages where after, it is mixed with the driving water. The thus formed solution is then divided through the pipes. The injected amount of concentrate is always proportionate to the amount of water that flows through the Dosatron, even if there are fluctuations in the water pressure or changes in the water flow.
Externally adjustable without phases
Proportional dosage, so always the set percentage, regardless of the flow or pressure.
Injection: D3RE5 is adjustable from 0,5 – 5%
Equipped with a Bypas (On- and off)
Application:
When you want to suck the higher concentrations
- Minimum temperature: 5°C
- Maximum temperarture: 40°C
- Conncection: 3/4‘’ M BSP-NPT
- Self suction
- Maximum suction height 4 meters
- Waterflow: 10 to 3.000 l/h
- Operating pressure: 0.3 to 6 bar
- Dosage: 0.5 to 5%
English
Czech
French
German
Polish
Slovak
Spanish